Used Lab Equipment - Page 1

This Spex Sampleprep 8000 Mixer Mill Model 8000D is used, but in good condition. It's been tested, and it works great. It's ready for a new home. It can be used to pulverize:

• Rocks
• Sand
• Slag
• Minerals
• Ceramics
• Etc

This New Brunswick G-25 shaker is used, but in good condition. Everything is working great - including the shaking, cooling, and heating functions. The chamber is extremely well insulated.

• Cooling/Heating (range info coming soon)
• Rotary shaking (1-inch orbit) - 40-400RPM
• Hermetically sealed double pane viewing window
• Adjustable air intake vent in chamber (permits room air to circulate through the chamber without affecting temp regulation
• 230V/60Hz, single phase
• Dimensions: coming soon

This Corning pH / Ion Analyzer 350 is used, but in good condition. It came out of a lab that closed down.

We have six of these Thermolyne 28125 Dri-Baths available - all in good working condition. They were pulled from a lab that closed down.

This Hach model 15320-00 bacterial incubator is used, but in good condition. It came from a lab that closed down.

This Fotolite 28C light stand is used, but in good condition. It gives you plenty of light, with two sockets. The arms are easily bendable into position where they remain. There are handles on the back of each light socket in case of heat, although you could always use LED bulbs if you prefer, which would generate less heat.

This Ohaus S200 compact digital scale is used, but in good working condition. The capacity is 202g x .01g. It came from a lab that ended up closing down.

This metal retort stand is used, but in good condition. Total height: 39 3/4" - Base plate: 6 1/2"W x 10"D x 1"H - post itself: 38 3/4"H

This Lab Society digital temperature monitor is used, but in good condition. From the manufacturer's website: Our new Digital Temperature Monitor was designed and built from the ground up, allowing you to accurately assess and record vapor temperatures.

This Lab Society Stirmax Controller is used, but in good condition. From the manufacturer's website: Our Analog Stirring Controller lets you plug in (and control) the magnetic stirrer motor mounted on the bottom of most heating mantles. This allows you to have direct control over the stirring mechanism inside the mantle.

This Lancer 1400up glassware washer is used, but in very good condition. It was no longer needed and was removed from a working bio lab. It was used for general glassware washing (glassware that held water, buffers, etc.). It was not used to wash out anything with any animal remnants or any pesticides. We have a PDF manual available as well.

This Particle Measuring Systems 7650 Condensation Particle Counter is in good condition. It came out of a working facility that closed one of their locations.

This Met One 1104 Condensation Nucleus Counter is in good condition. It came out of a working facility that closed one of their locations.

We have two of these used driSteem Vapormist humidifiers available for sale. The Vapormist humidifiers are compact, cabinet-style units perfect for finished spaces and compatible with all water types and numerous dispersion options. Installation is a snap, just attach the frame to a supporting structure and connect electrical and water services. Runs on 208V, 1PH, 50/60Hz.

This New Brunswick motor was used for reactor/fermenting systems. It's in good condition overall, and we believe it to be working, although we can't confirm it.

This New Brunswick Glass Reactor Vessel fits New Brunswick fermenting systems. It's in fair/good condition. The glass has some small chips in it as shown in the photos, but not too bad. It's missing one of the screws (shown in photos also). This vessel is Direct Drive. The vessel has welded port fitments and water hook ups and thru glass ports and wacked tall/narrow aspect ratio, that's an early 3000 or well could be later III fermentation vessel. It has a 7 liter capacity.

This Bioflo 3000 fermenting system came along with some other equipment from a working lab. They were not using this unit, so they're not positive it works or not. Most likely it does - HOWEVER... there is no motor for the vessel, so you would need to get one. We do have a motor (see HERE), but it's magnetic drive, and it needs to be direct drive to fit the vessel included with this fermenter. The glass reactor vessel is included (1.75L capacity).

We have two of these used Chrysallis II Zero Air Generators - 6LPM. Both were purchased some time back, but were never used.
 
The Ultra Zero Air Generator series, from LNI Schmidlin, utilizes existing in-house compressed air to produce continuous, high-quality purified air for even the most demanding applications. The small footprint saves valuable laboratory floor-space and bench-space.

Shimadzu RF-535 Flourescense HPLC Monitor - came out of a working lab that no longer needed the equipment.

This LAB 10 Aluminum Cryogenic Dewar (10L) is used, but in good condition. It came from a lab that no longer needed it. We don't have the hangers for it, but if you just need some cold storage, this could be perfect.

Jun-air Oil-less Rocking Piston Compressor with dryer (model #: OF302-25MD). It runs VERY quiet. This unit includes it's own dryer (on back). It's in excellent shape - working perfectly when recently uninstalled. We have a PDF tech sheet, and PDF manual available as well.

This Precision 181 water bath is used, but in good condition (yes, it has been tested). The temperature range is 5C to 40C. It has a 2.5L capacity.